Climadoor UPVC French Doors - Anthracite Grey
Select Quantity
Product Description
This 1790mm wide x 2090mm High, Anthracite Grey French Door is supplied for ease of installation fully glazed with all the hinges and locking systems prefitted and tested in operation in the factory before despatch. This high security UPVC French Door incorperates a 7 point locking system, steel reinforced profiles and internal beading for extra security.
The key features of this set are as follows:
a) Two opening door to give a clear opening with the Left Hand Door (viewed outside) as the lead door.
b) 7 Point Multipoint locking system to the Master Door and Secondry lock with Shoot Bolts to the Slave Door.
c) Narrow door stiles and framing for maximum glass sizes.
d) 70mm Fully reinforced steel UPVC profiles for rigidity and security.
e) 28mm Toughened, Argon Filled Double glazed units compliant with BSEN12150 and BSEN1279
f) Internally beaded for maximum security.
g) Set includes 150mm sill and trickle vents for Part F Compliance
h) 10 Year Guarantee against manufacturing defects.
All our UPVC doors can be manufactured in a made to measure format to sizes to suit your opening, with different glazing specifications if required. Please forward all enquiries to our sales@ email address.
Futher Information
- Size: 1800mm (6ft)
- Brickwork Opening: 1805x2105
- Code: GRYUPVCFR1800
Specification
| Finish
i Unfinished – the doors are manufactured in untreated material state, with no sealant applied. These doors need to be lightly sanded and decorated by the end user. Primed – Doors which have been lightly sanded and had a primer coat applied, but still need further coat(s) to seal the door or to achieve the final colour you desire. Prefinished / Fully Finished – These doors have been factory decorated and don’t need any further decoration. | Anthracite Grey |
|---|---|
| Guarantee | 10 Year Manufacturing Guarantee |
| Hardware | Black Handle and Hinges |
| Glazing | Low E Toughened Double Glazing |
| Opening Options | Left Hand Master (Viewed Outside) |
| Material | UPVC |
| Part F Compliant
i Part F (also known as Approved Document F) of the Building Regulations in the UK covers ventilation, air quality, and condensation prevention in all buildings. Part-F Compliant products ensure that (often through being supplied with trickle vents) buildings have adequate ventilation to replace indoor air with fresh air from outside. | Yes |
| Part L Compliant
i Part L (also known as Approved Document L) of the Building Regulations in the UK sets minimum standards for the energy efficiency of new and existing buildings. The regulations apply to anyone involved in designing, constructing, or renovating buildings. The Thermal performance of a door is stated as a U-Value. The lower the U-Value the better the thermal performance. In building refurbishment situations, windows or doors should meet or exceed 1.4w/m2K, or have an Energy Rating Level B. In new build situation, the target U-Value is usually 1.2w/m2K. | Yes |
| U-Value
i This is the measurement of thermal performance of a product, and covers all elements of that product, inc glass and materials. The lower the U value the better the performance of the product. | 1.2W/m²K |
| Part Q Compliant
i Part Q (also known as Approved Document Q) of the Building Regulations covers the security of dwellings. This standard outlines the requirements for the levels of security any manufacturer needs to comply with to prevent forced entry. It covers the products overall design strength, the locking mechanism the the glass type used as well as other things. Different to PAS24 compliance. | No |
| Security | 7 point multipoint locking system |
| Weather Tested
i Products are tested to ensure they prevent air ingress, water ingress, and provide resistance to wind loading. | Yes |
| Cill Spec
i The cill is the bottom part of any window or door that sits onto the brickwork at the bottom of the opening. This is designed to ensure water that runs down the window or door doesn’t run down the brickwork, preventing mould growth and dampness. Cill measurements are taken from the inside of the window or door frame, to the outermost edge | 150mm |
| Appearance | Grain Effect |
