Aspect UPVC Bi-fold Doors - White High Security
Select Quantity
Product Description
This 3590mm wide x 2090mm high 4 door (12ft) 1L/3R White UPVC Bifold door is supplied fully assembled for ease of installation with all hinges, fittings and runners already attached, with the doors tested in operation in the factory before despatch. This high security UPVC Bifold door saves a huge amount of time on fitting on site, allowing for a speedy installation. (Glass supplied loose for glazing after installation due to weight). The key features of this set are as follows:
a) 4 door system with 3 doors folding to the right as viewed from outside and daily access door on the left.
b) Daily access door that can be opened independently.
c) 7 Point Multipoint locking system to daily access door.
d) Narrow door stiles and framing for maximum glass sizes.
e) 70mm Fully reinforced steel UPVC profiles for absolute rigidity and security.
f) 28mm Toughened Double glazed units compliant with BSEN12150 and BSEN1279
g) Internally beaded for maximum security.
h) Set includes 150mm sill and trickle vents for Part F Compliance
i) 10 Year Guarantee against manufacturing defects.
All our UPVC Bifold doors can be manufactured in a made to measure format to sizes to suit your opening, with different glazing specifications if required. Please forward all enquiries to our sales@ email address.
Futher Information
- Size: 4 Door 3600mm (12ft)
- Brickwork Opening: 3605x2105
- Door Pattern: 1 Left/3 Right
- Code: WHIUPVCBI36001L3R
Specification
| Finish
i
Unfinished – the doors are manufactured in untreated material state, with no sealant applied. These doors need to be lightly sanded and decorated by the end user.
Primed – Doors which have been lightly sanded and had a primer coat applied, but still need further coat(s) to seal the door or to achieve the final colour you desire. Prefinished / Fully Finished – These doors have been factory decorated and don’t need any further decoration. |
White |
|---|---|
| Guarantee | 10 Year Manufacturing Guarantee |
| Hardware | White Handles and Hinges |
| Glazing | Low E Toughened Double Glazing |
| Opening Options | Folding to the Left, Folding to the Left, Or Right, Or Right |
| Material | UPVC |
| Part F Compliant
i
Part F (also known as Approved Document F) of the Building Regulations in the UK covers ventilation, air quality, and condensation prevention in all buildings. Part-F Compliant products ensure that (often through being supplied with trickle vents) buildings have adequate ventilation to replace indoor air with fresh air from outside.
|
Yes |
| Part L Compliant
i
Part L (also known as Approved Document L) of the Building Regulations in the UK sets minimum standards for the energy efficiency of new and existing buildings. The regulations apply to anyone involved in designing, constructing, or renovating buildings. The Thermal performance of a door is stated as a U-Value. The lower the U-Value the better the thermal performance. In building refurbishment situations, windows or doors should meet or exceed 1.4w/m2K, or have an Energy Rating Level B. In new build situation, the target U-Value is usually 1.2w/m2K.
|
Yes |
| U-Value
i
This is the measurement of thermal performance of a product, and covers all elements of that product, inc glass and materials. The lower the U value the better the performance of the product.
|
1.3W/m²K |
| Part Q Compliant
i
Part Q (also known as Approved Document Q) of the Building Regulations covers the security of dwellings. This standard outlines the requirements for the levels of security any manufacturer needs to comply with to prevent forced entry. It covers the products overall design strength, the locking mechanism the the glass type used as well as other things. Different to PAS24 compliance.
|
No |
| Security | 7 point multipoint locking system |
| Weather Tested
i
Products are tested to ensure they prevent air ingress, water ingress, and provide resistance to wind loading.
|
Yes |
| Cill Spec
i
The cill is the bottom part of any window or door that sits onto the brickwork at the bottom of the opening. This is designed to ensure water that runs down the window or door doesn’t run down the brickwork, preventing mould growth and dampness. Cill measurements are taken from the inside of the window or door frame, to the outermost edge
|
150mm |
