UPVC Anthracite Grey Sliding Doors
Select Quantity
Product Description
Our Anthracite Grey Sliding patio doors are an excellent choice if you require a door to fit where opening sashes are not an option. Due to the sliding door design, the Sliding patio door system can be fitted in to more compact rooms that won't allow the fitting of opening style doors. Both sturdy and flexible in design, a sliding patio door will allow you to flood your living area with light. The design allows the unbroken glass area to be larger than most other types of doors allow. Available in 2, 3 or 4 door designs and stocked in standard sizes in White and Anthracite Grey, we are sure to have a door in stock to meet with your requirements.
These Grey External Sliding Door sizes are offered with the slider on either side. Our stocked 2 door Anthracite Grey Patio doors are supplied assembled, with almost all hardware pre-fitted. All Our Sliding patios are delivered with the doors pre-fitted into an assembled frame, and the glass separate. 1790mm Wide x 2090mm High (Note, this refers to the external dimensions of the frame including the cill and vent) 2 Door style option (1 fixed door and 1 sliding door) Extender kits available in 15mm or 25mm to increase overall width at extra cost. Steel reinforced 70mm uPVC profiles. Double glazed 28mm toughened safety glass units to BSEN12150 and BSEN1279. Internally beaded for improved security. High security multi point locking system. Includes handles, cill and ventilator. Exceptional energy efficiency as standard with 'Warm edge glass'. 10-year product guarantee - terms apply. Manufactured in the UK.
Futher Information
- Size: 1800mm (6ft)
- Brickwork Opening: 1805x2105
- Code: GRYUPVCSLI1800LHSRHF
Specification
| Cill Spec
i The cill is the bottom part of any window or door that sits onto the brickwork at the bottom of the opening. This is designed to ensure water that runs down the window or door doesn’t run down the brickwork, preventing mould growth and dampness. Cill measurements are taken from the inside of the window or door frame, to the outermost edge | 150mm |
|---|---|
| Material | UPVC |
| Part L Compliant
i Part L (also known as Approved Document L) of the Building Regulations in the UK sets minimum standards for the energy efficiency of new and existing buildings. The regulations apply to anyone involved in designing, constructing, or renovating buildings. The Thermal performance of a door is stated as a U-Value. The lower the U-Value the better the thermal performance. In building refurbishment situations, windows or doors should meet or exceed 1.4w/m2K, or have an Energy Rating Level B. In new build situation, the target U-Value is usually 1.2w/m2K. | Yes |
| U-Value
i This is the measurement of thermal performance of a product, and covers all elements of that product, inc glass and materials. The lower the U value the better the performance of the product. | 1.3W/m²K |
| Security | 5 Point Multipoint Locking |
| Guarantee | 10 Year Manufacturing Guarantee |
| Hardware | Black Handles and Hinges |
| Brickwork Opening
i The brickwork opening (AKA structural opening) is the suggested size that you make the hole in the wall to ensure the product you purchase will fit. The suggested brickwork opening size gives a clearance on the product size to allow the fitter to install the product level and plumb. | 1805x2105mm |
| Opening Options | Sliding to the Left, Or Right |
| Part F Compliant
i Part F (also known as Approved Document F) of the Building Regulations in the UK covers ventilation, air quality, and condensation prevention in all buildings. Part-F Compliant products ensure that (often through being supplied with trickle vents) buildings have adequate ventilation to replace indoor air with fresh air from outside. | Yes |
| Part Q Compliant
i Part Q (also known as Approved Document Q) of the Building Regulations covers the security of dwellings. This standard outlines the requirements for the levels of security any manufacturer needs to comply with to prevent forced entry. It covers the products overall design strength, the locking mechanism the the glass type used as well as other things. Different to PAS24 compliance. | No |
| Weather Tested
i Products are tested to ensure they prevent air ingress, water ingress, and provide resistance to wind loading. | Yes |
| Size | 1800mm (6ft) |
| Appearance | Grain Effect |
| Glazing | Low E Toughened Double Glazing |
|
Finish
i Unfinished – the doors are manufactured in untreated material state, with no sealant applied. These doors need to be lightly sanded and decorated by the end user. Primed – Doors which have been lightly sanded and had a primer coat applied, but still need further coat(s) to seal the door or to achieve the final colour you desire. Prefinished / Fully Finished – These doors have been factory decorated and don’t need any further decoration. | Anthracite Grey |
| Code | GRYUPVCSLI1800LHSRHF |
