This 2990mm wide x 2090mm high 3 door (10ft) 3L Climadoor White UPVC Bifold door is supplied fully assembled for ease of installation with all hinges, fittings and runners already attached, with the doors tested in operation in the factory before despatch. This high security UPVC Bifold door saves a huge amount of time on fitting on site, allowing for a speedy installation. (Glass supplied loose for glazing after installation due to weight). The key features of this set are as follows:
a) 3 door system with all 3 doors folding to the left as viewed from outside.
b) Daily access door that can be opened independently.
c) 7 Point Multipoint locking system to daily access door.
d) Narrow door stiles and framing for maximum glass sizes.
e) 70mm Fully reinforced steel UPVC profiles for absolute rigidity and security.
f) 28mm Toughened Double glazed units compliant with BSEN12150 and BSEN1279
g) Internally beaded for maximum security.
h) Set includes 150mm sill and trickle vents for Part F Compliance
i) 10 Year Guarantee against manufacturing defects.
All our Climadoor UPVC Bifold doors can be manufactured in a made to measure format to sizes to suit your opening, with different glazing specifications if required. Please forward all enquiries to our sales@ email address.
Futher Information
| Category | Bifold Doors |
|---|---|
| Brand | Climadoor |
| Material | UPVC |
| Glazing | Laminated Security Double Glazing |
| Finish | White |
| Panels | 3 |
| Colour | White |
| Size | 3 Door 3000mm (10ft) |
| Brickwork Opening
The brickwork opening (AKA structural opening) is the suggested size that you make the hole in the wall to ensure the product you purchase will fit. The suggested brickwork opening size gives a clearance on the product size to allow the fitter to install the product level and plumb.
|
3005x2105 |
| Door Pattern
In internal folding door systems, the door pattern is the number of doors and what their folding formation emulates.
Examples: 3+0 – all three doors fold to one side, with a daily access door on the end. 3+1 – three doors fold to one side, with a daily access door hinged from the opposite frame leg (jamb). 2+2 – two doors fold to the left, and two to the right. 5+0 – all five doors fold to one side with a daily access door on the end. |
3 Left |
| Guarantee | 10 Year Manufacturing Guarantee |
| Hardware | White Handles and Hinges |
| Opening Options | Folding to the Left, Or Right |
| Part F Compliant
Part F (also known as Approved Document F) of the Building Regulations in the UK covers ventilation, air quality, and condensation prevention in all buildings. Part-F Compliant products ensure that (often through being supplied with trickle vents) buildings have adequate ventilation to replace indoor air with fresh air from outside.
|
Yes |
| Part L Compliant
Part L (also known as Approved Document L) of the Building Regulations in the UK sets minimum standards for the energy efficiency of new and existing buildings. The regulations apply to anyone involved in designing, constructing, or renovating buildings. The Thermal performance of a door is stated as a U-Value. The lower the U-Value the better the thermal performance. In building refurbishment situations, windows or doors should meet or exceed 1.4w/m2K, or have an Energy Rating Level B. In new build situation, the target U-Value is usually 1.2w/m2K.
|
Yes |
| U-Value
This is the measurement of thermal performance of a product, and covers all elements of that product, inc glass and materials. The lower the U value the better the performance of the product.
|
1.3W/m²K |
| Part Q Compliant
Part Q (also known as Approved Document Q) of the Building Regulations covers the security of dwellings. This standard outlines the requirements for the levels of security any manufacturer needs to comply with to prevent forced entry. It covers the products overall design strength, the locking mechanism the the glass type used as well as other things. Different to PAS24 compliance.
|
Yes |
| Security | PAS 24 Rated multipoint locking system |
| Weather Tested
Products are tested to ensure they prevent air ingress, water ingress, and provide resistance to wind loading.
|
Yes |
| Cill Spec
The cill is the bottom part of any window or door that sits onto the brickwork at the bottom of the opening. This is designed to ensure water that runs down the window or door doesn’t run down the brickwork, preventing mould growth and dampness. Cill measurements are taken from the inside of the window or door frame, to the outermost edge
|
150mm |
| Product Code | WHIUPVCBI30003LPTQ |
10 Year Guarantee
Buy safe in the knowledge that all our products come with a 10 year guarantee as standard.
3-7 Working Days Delivery*
With stock available to ship immediately, we can deliver within 3-7 working days. *Exceptions apply.
Nationwide Delivery
Free Over £750
We offer free delivery to all UK mainland addresses, for orders over £750.
All Prices Include VAT
With no hidden add-ons, all our prices on screen include VAT