Part Q Anthracite Grey Aluminium Sliding Doors
Select Quantity
Product Description
These Part Q Compliant Anthracite Grey Aluminium Sliding Doors offer the very best in design and build. Ideal for New Builds or Extensions, these sliding doors comply with the requirements of Part Q of the Current UK Building Regulations. These sets give you the ability to maximise the light into your home, whilst accommodating the largest door sizes available. These Anthracite Grey Aluminium Sliding Doors offer much larger sashes compared to other types of door systems and have become really popular in the last few years, with the growth in the use of grey finishes, matched with the enhancement of wanting to open your home to the garden. The sleek profiles give a contemporary premium look to any building, and follow a modern Trend in the use of Low maintenance, Slim, Powder Coated Aluminium Profiles which are thermally broken to give good energy efficiency. Our Part Q Compliant Aluminium Sliding Patio Doors are available in twin and triple track options depending on the number of doors chosen.
We offer a full bespoke service on these items so don't hesitate to contact us if you have a different size, colour or specific requirement (at Extra cost). This option is supplied fully assembled with almost all fittings attached (Glass supplied loose due to weight) 2990mm Wide x 2090mm High (Note, this refers to the external dimensions of the frame including the cill and vent). Left door slides to right (As viewed from outside) 2 Door style option (1 fixed door and 1 sliding door). 6.8mm Laminated Outer and 4 mm Toughened Inner, Double Glazed Units. Exceptional energy efficiency as standard with 'Warm edge glass'. Internally beaded for improved security. High Security Multi-point locking system. Includes handles, 150mm cill and ventilator. Manufactured in the UK. FREE UK Mainland delivery.
Futher Information
- Size: 3000mm (10ft)
- Brickwork Opening: 3005x2105
- Code: GRYALISLI3000LHSRHFPTQ
Specification
| Finish
i Unfinished – the doors are manufactured in untreated material state, with no sealant applied. These doors need to be lightly sanded and decorated by the end user. Primed – Doors which have been lightly sanded and had a primer coat applied, but still need further coat(s) to seal the door or to achieve the final colour you desire. Prefinished / Fully Finished – These doors have been factory decorated and don’t need any further decoration. | Anthracite Grey |
|---|---|
| Guarantee | Aluminium 20 Years, Aluminium 20 Years, Glazing 10 Years, Glazing 10 Years |
| Hardware | Brushed Stainless Steel |
| Glazing | Laminated Security Double Glazing |
| Opening Options | Or Right, Sliding to the Left, Sliding to the Left, Or Right |
| Material | Thermally Broken Aluminium |
| Part F Compliant
i Part F (also known as Approved Document F) of the Building Regulations in the UK covers ventilation, air quality, and condensation prevention in all buildings. Part-F Compliant products ensure that (often through being supplied with trickle vents) buildings have adequate ventilation to replace indoor air with fresh air from outside. | Yes |
| Part L Compliant
i Part L (also known as Approved Document L) of the Building Regulations in the UK sets minimum standards for the energy efficiency of new and existing buildings. The regulations apply to anyone involved in designing, constructing, or renovating buildings. The Thermal performance of a door is stated as a U-Value. The lower the U-Value the better the thermal performance. In building refurbishment situations, windows or doors should meet or exceed 1.4w/m2K, or have an Energy Rating Level B. In new build situation, the target U-Value is usually 1.2w/m2K. | Yes |
| Part Q Compliant
i Part Q (also known as Approved Document Q) of the Building Regulations covers the security of dwellings. This standard outlines the requirements for the levels of security any manufacturer needs to comply with to prevent forced entry. It covers the products overall design strength, the locking mechanism the the glass type used as well as other things. Different to PAS24 compliance. | Yes |
| Security | PAS 24 Rated multipoint locking system |
| Weather Tested
i Products are tested to ensure they prevent air ingress, water ingress, and provide resistance to wind loading. | Yes |
| Cill Spec
i The cill is the bottom part of any window or door that sits onto the brickwork at the bottom of the opening. This is designed to ensure water that runs down the window or door doesn’t run down the brickwork, preventing mould growth and dampness. Cill measurements are taken from the inside of the window or door frame, to the outermost edge | 150mm Cill |
