Climadoor Black Aluminium French Doors - Part Q Compliant
Select Quantity
Product Description
Our range of Part Q Compliant Thermally Broken, Black RAL 9005M Powder Coated Aluminium French Doors offers the extra security required by Part Q of the UK Building Regulations, making them an ideal solution for extensions and new build homes. These sets provide a sturdy feel and boast the very best in quality and aesthetics, featuring slim profiles and a smooth Black RAL 9005M finish.
The pair of french doors come pre-hung and factory-tested, with cill, and glass units supplied separately for on-site installation, to decrease handling weight.
These Open Out French Door sets come with a 170mm sill and matching ironmongery, allowing you to coordinate your French, bifold, and sliding door systems seamlessly. Unlike UPVC and timber alternatives, our Black RAL 9005M Aluminium French Patio Doors offer a strong and sturdy design, ensuring minimal movement over time. Despite their slightly higher price point, you can trust that you're investing in a product that requires very low maintenance and will stand the test of time, manufactured from a material that has seen a resurgence in the UK market in recent years.
Our French doors come complete with everything you need, including frame, hardware, doors, sidelights, and 6.8mm Laminated Outer, 4mm Toughened Inner, Low E, Double Glazed units as standard. Additionally, we offer a fully bespoke option to tailor the doors to your specific requirements. Simply email us at enquiries@doors-more.co.uk
Specification
| Material | Thermally Broken Aluminium |
|---|---|
| Cill Spec
i
The cill is the bottom part of any window or door that sits onto the brickwork at the bottom of the opening. This is designed to ensure water that runs down the window or door doesn’t run down the brickwork, preventing mould growth and dampness. Cill measurements are taken from the inside of the window or door frame, to the outermost edge
|
170mm |
| Finish
i
Unfinished – the doors are manufactured in untreated material state, with no sealant applied. These doors need to be lightly sanded and decorated by the end user.
Primed – Doors which have been lightly sanded and had a primer coat applied, but still need further coat(s) to seal the door or to achieve the final colour you desire. Prefinished / Fully Finished – These doors have been factory decorated and don’t need any further decoration. |
Black |
| Part L Compliant
i
Part L (also known as Approved Document L) of the Building Regulations in the UK sets minimum standards for the energy efficiency of new and existing buildings. The regulations apply to anyone involved in designing, constructing, or renovating buildings. The Thermal performance of a door is stated as a U-Value. The lower the U-Value the better the thermal performance. In building refurbishment situations, windows or doors should meet or exceed 1.4w/m2K, or have an Energy Rating Level B. In new build situation, the target U-Value is usually 1.2w/m2K.
|
Yes |
| U-Value
i
This is the measurement of thermal performance of a product, and covers all elements of that product, inc glass and materials. The lower the U value the better the performance of the product.
|
1.3W/m²K |
| Security | PAS 24 Rated multipoint locking system |
| Glazing | Laminated Security Double Glazing |
| Guarantee | Aluminium 20 Years, Glazing 10 Years |
| Hardware | Black Handles and Hinges |
| Opening Options | Left Hand Master (Viewed Outside) |
| Part F Compliant
i
Part F (also known as Approved Document F) of the Building Regulations in the UK covers ventilation, air quality, and condensation prevention in all buildings. Part-F Compliant products ensure that (often through being supplied with trickle vents) buildings have adequate ventilation to replace indoor air with fresh air from outside.
|
Yes |
| Part Q Compliant
i
Part Q (also known as Approved Document Q) of the Building Regulations covers the security of dwellings. This standard outlines the requirements for the levels of security any manufacturer needs to comply with to prevent forced entry. It covers the products overall design strength, the locking mechanism the the glass type used as well as other things. Different to PAS24 compliance.
|
Yes |
| Weather Tested
i
Products are tested to ensure they prevent air ingress, water ingress, and provide resistance to wind loading.
|
Yes |
